OPTICAL ACTIVE & PASSIVE

SINGLE FIBER PASSIVE CWDM

Single Fiber (BiDi) CWDM mux (passive filters) product line is part of our xWDM product line uses up to 18 CWDM(Coarse Wavelength Division Multiplex) optical channel plan as defined by ITU-T G.694.2 allowing to organize up to 9 parallel and independent data streams over single fiber of single-mode optical fiber. xWDM technology remains as todays prevailing technology for extending black fiber capacity. Main advantages of xWDM technology are its passive nature – no power supply or cooling necessary, robustness – no special microclimate requirements and as passive element, it has MTBF 100+ Years. xWDM – it is fully data rate or line protocol neutral – it is possible to use with colored transceivers supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel. It is simple to install, requires no configuration or maintenance. We designed Single Fiber (BiDi) CWDM mux product line focusing on minimizing insertion loss allowing to extend maximum reach of CWDM technology, logical structure allowing to minimize initial investments and support gradual growth of CWDM capacity. Single Fiber (BiDi) CWDM mux product line uses CWDM channel plan in bi-directional mode, where transmission directions on same fiber are separated by using different wavelengths.

This image for Image Layouts addon

For Maximum Capacity

8 and 9 Channels for A and B Sides

This image for Image Layouts addon

For Granular Expension

SCMD-4A-L - Low-Band 2 or 4 Channel

SCMD-2A-E - Expandable 2 or 4 Channel

This image for Image Layouts addon

For Minimal Insertion Loss

SCMD-4A - 4 Data Channel for A and B Sides

This image for Image Layouts addon

For Adding/Dropping Channels

SCLT-1 - Line Termination Units for 1 or 2 Channels

SCAD-1 - OADM for 1 or 2 Channels

DOUBLE FIBER PASSIVE CWDM

Double Fiber CWDM mux (passive filters) product line is part of our xWDM product line uses up to 18 CWDM(Coarse Wavelength Division Multiplex) optical channel plan as defined by ITU-T G.694.2 allowing to organize up to 18 parallel and independent data streams over pair of single-mode optical fibers using CWDM multiplexing. xWDM technology remains as today’s prevailing technology for extending black fiber capacity. Main advantages of xWDM technology are its passive nature – no power supply or cooling necessary, robustness – no special microclimate requirements and as passive element, it has MTBF 100+ Years. xWDM – it is fully data rate or line protocol neutral – it is possible to use with colored transceivers supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel. It is simple to install, requires no configuration or maintenance. We designed Double Fiber CWDM mux product line focusing on minimizing insertion loss allowing to extend maximum reach of CWDM technology, logical structure allowing to minimize initial investments and support gradual growth of CWDM capacity.

This image for Image Layouts addon

For Maximum Capacity

DCMD-18 - 18 Channels Double Fiber Mux/Demux

DCMD-16 - 16 Channels Double Fiber Mux/Demux

This image for Image Layouts addon

For Granular Expansion

High-Band

DCMD-8HE and DCMD-4HE

Low-Band

DCMD-8L and DCMD-4L

This image for Image Layouts addon

Minimal Insertion Loss

DCMD-8H and DCMD-4H

This image for Image Layouts addon

For Adding/Dropping Channels

Line Termination Units:

  • DCLT-1
  • DCLT-2
  • DCLT-4

OADM Units:

  • DCAD-1
  • DCAD-2
  • DCAD-4

SINGLE FIBER PASSIVE DWDM

Double Fiber CWDM mux (passive filters) product line is part of our xWDM product line uses up to 18 CWDM(Coarse Wavelength Division Multiplex) optical channel plan as defined by ITU-T G.694.2 allowing to organize up to 18 parallel and independent data streams over pair of single-mode optical fibers using CWDM multiplexing. xWDM technology remains as today’s prevailing technology for extending black fiber capacity. Main advantages of xWDM technology are its passive nature – no power supply or cooling necessary, robustness – no special microclimate requirements and as passive element, it has MTBF 100+ Years. xWDM – it is fully data rate or line protocol neutral – it is possible to use with colored transceivers supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel. It is simple to install, requires no configuration or maintenance. We designed Double Fiber CWDM mux product line focusing on minimizing insertion loss allowing to extend maximum reach of CWDM technology, logical structure allowing to minimize initial investments and support gradual growth of CWDM capacity.

This image for Image Layouts addon

For Granular Expansion

SDMD-8A-A (8 Channels DWDM)

SDMD-8A-E (8 Channels Expandable DWDM)

This image for Image Layouts addon

For Adding/Dropping Channels

Line Termination Units:

  • SDLT-1
  • SDLT-2

OADM Units:

  • SDAD-1
  • SDAD-2

DOUBLE FIBER PASSIVE DWDM

Double Fiber CWDM mux (passive filters) product line is part of our xWDM product line uses up to 18 CWDM(Coarse Wavelength Division Multiplex) optical channel plan as defined by ITU-T G.694.2 allowing to organize up to 18 parallel and independent data streams over pair of single-mode optical fibers using CWDM multiplexing. xWDM technology remains as today’s prevailing technology for extending black fiber capacity. Main advantages of xWDM technology are its passive nature – no power supply or cooling necessary, robustness – no special microclimate requirements and as passive element, it has MTBF 100+ Years. xWDM – it is fully data rate or line protocol neutral – it is possible to use with colored transceivers supporting such applications as 1G/10G Ethernet, SDH/SONET and 8/4/2/1G Fiber Channel. It is simple to install, requires no configuration or maintenance. We designed Double Fiber CWDM mux product line focusing on minimizing insertion loss allowing to extend maximum reach of CWDM technology, logical structure allowing to minimize initial investments and support gradual growth of CWDM capacity.

This image for Image Layouts addon

For 50GHz Channel Plan

DDMD-40-50 40 Even or Odd Channel 50GHz DWDM Mux/Demux

This image for Image Layouts addon

For Maximum Capacity (100GHz)

DDMD-40 40 Channels 100GHz DWDM Mux/Demux

This image for Image Layouts addon

For Hybrid-WDM Solution

DDMD-8-3441 - 8 Channels Expandable Hybrid-WDM (Ch1550) mux/demux

DDMD-10-5160 - 10 Channel Hybrid-WDM (Ch1540) mux/demux

This image for Image Layouts addon

For Adding/Dropping Channels

Line Termination Units:

  • DDLT-1
  • DDLT-2
  • DDLT-4
  • DDLT-8

OADM Units:

  • DDAD-1
  • DDAD-2
  • DDAD-4

Transceiver

We supply transceivers for broad application, use case and wavelength, from 10Mbps - 100Gbps. below are the types of transceivers that we can offer
  • SFP
  • SFP+
  • XFP
  • GBIC
  • QSFP+
  • QSFP28
  • CFP/2/4
Transceiver.JPG

Passive Components

Passive-Connector.JPG
• Owned by CoreMTX Sdn Bhd (1153326-M) • All Rights Reserved •

Search